Easy Steps in Installing an IP cam Remote That Even a Novice Can Do

Ip CameraQuestions like ‘how to install an IP cam remote?’ is common if you want an advanced way of monitoring your home, establishment, or property.

Internet Protocol (IP) Camera is a digital surveillance camera that is capable of pitching and receiving real-time information via a computer network or the internet.

IP camera (also called Network Cameras) is considered as a digitalized version of closed-circuit television.

Aside from the fast pitching of data, you must also install this camera since it has the capability to send a warning once a suspicious event is detected automatically.

Also, you can configure this type of camera to do progressive scanning, which makes the quality of the recorded image or scene to be of higher quality.

Start Here:

What you Need to Secure in Installing a Network Camera

  • IP Camera. You must only purchase a network or IP camera from a legit and trusted manufacturer. Some cases of bugs occur when the camera is obtained from a hoax site.
  • Ethernet Router. The router will allow you to set up a network between your camera and the computers that will serve as the monitor.
  • Computer or other Network Devices. These will be used to display data based on the feed of the network cameras.

Now, if you want to know how to install an IP cam remote personally, then just follow these easy steps.

Recommended Security Camera Buying Guide: 5 of the Best Battery Powered Security Camera

What you Need to Secure in Installing a Network Camera

How to Setup IP Camera for Remote Viewing

1. Basic Network Configuration. You first need to establish a network connection between the router, the IP camera, and the computers.  You have to be very careful since most of the routers have active firewall protection by default.

  • Configure the port forwarding/ port mapping utility so that the router will provide access to the other devices connected in a network.
  • To set- up the port forwarding, you need to get some network information, including the camera’s IP address, router’s internal IP address, external IP address of the router and the port number used.
  • To check the IP address of the router (Windows 7 Operating System), hit the Windows button plus ‘R’ key to access the Windows ‘run’ utility.  Then, type ‘cmd’ to navigate into the Command Prompt tab.
  • Once you are in the ‘cmd’ tab, input ‘ipconfig’ then Enter. This command will display important network information such as the computer’s IP address, Default Gateway, and subnet mask.
  • If you are connected to your router through a wireless connection, you can check the network information in the “Ethernet Adaptor Local Wireless Connection.’ Meanwhile, if you are connected via patch cable, look for the “Ethernet Adaptor Local Area Connection.”
  • You can determine the IP of the router by checking the default gateway. Now, if there are two gateways, you can manually check which one is the IP address of your router through keying each of the Default Gateways in the URL. The router’s IP will lead you on the router’s web page and configuration tabs.
  • The next that you will do is to identify the camera’s port number. The port number is displayed on the camera’s web page, particularly in the settings option. Most of the IP camera utilizes the number 80 port by default.
  • If you are using more than one camera, you can change the other ports to avoid conflict of channels.
  • In checking the external IP address of the router, you can use third- party software available on the internet.

ping cctv

2. Set a Static IP Address for the Camera. Once the port forwarding utility is set up, you need to set a static IP for your camera. Otherwise, if you still use the dynamic IP, then you cannot access an IP cam remote.

  • You need to get access to the camera’s configuration web page. You can do this by keying the IP of the camera into the URL. If you do not know the IP of your camera, then you can search for it on the manufacturer’s website.
  • The next thing that you must do is to navigate into the ‘Obtain IP Address Automatically’ and uncheck this option. You can now enter an appropriate static IP of your camera to connect it to the network.
  • Now, if you have no idea about the suited IP address, then I advise using one that is currently used by your camera. You can see this IP on top of the URL once you are logged in in the camera’s web interface site. The address should have a format like 192.168.0.253 (but the IP is not strictly confined only to the Type C IP address).
  • Then, you need to supply the default gateway and the subnet mask. You already obtained this information earlier in the ‘cmd’ utility.
  • There are also instances wherein you are required to input a primary and secondary DNS server. By default, you can key the Default Gateway as the primary DNS server and leave the secondary DNS server blank.
  • Once you complete all these steps, you must save the changes you have made and then reboot the camera. Once the camera reboots, check if the IP address has been successfully set through logging it on a web search browser.

3. Establishing a Port Forwarding Capability. The Port Forwarding utility serves as the phone book of your computer. The router scans all the port numbers and finds the specific port (the subject of the request) and then sends the data on the host address.

In setting up the Port Forwarding role, you will be asked to supply the starting and ending ports used. Some types of routers will also ask for the specific type of traffic that you want to enable (whether TCP or UDP). We recommend you allow the TCP traffic.

Just always remember that you need to check first the model of your router since different manufacturers employ a distinct configuration method.

Since you already know how to set up an IP cam remote, it is also important for you to understand how to access the camera when you are out of your office or establishment. Just refer to the following information as your guide.

Port Forwarding Capability camera

3 Easy Ways to Remotely Access Your Network Camera

There are three methods of accessing an IP cam remote to stream the real-time event of your home, establishment, or property.

1. Via the App/ Client of the Manufacturer (Needs internet connection).

  • The first step is to download the manufacturer’s App and Client. This software is built- into every security camera, so there’s no need to worry on compatibility issue. The App and Client utilize the P2P Technology which enables the administrator to access the camera using the internet remotely.
  • Launch the application and input the Unique ID number (UID) to add the IP camera.
  • Click the camera over the App or Client tab, and from there you can view your IP camera. You can also access your camera through several devices. Some of the IP cameras today is capable of up to eight multiple device access (you can at the same time use your computers, Android phones, or tablets).

Remotely Access Your Network Camera

2. Router’s IP Address and Camera’s Web Access Port

  • Access your router’s setup page by keying “http://192.168.1.1” in the URL. You can enter it into the configuration tab through keying ‘admin’ as the password and leave the User Name blank.

(Note: If you changed the default password and IP address, input those instead)

  • Navigate on the Status Tab, hover to the Internet page and look for the listed IP address.
  • Open an internet browser then enter the IP address of the router together with the IP camera’s dedicated web access port, and then hit ENTER. (Example: “http://x.x.x.x:1026” The ‘x’ represents the IP address of the router and the ‘1026’ is the web access port of the camera.)
  • Once the camera’s set-up page is loaded, hit the View Video option.  You must now view the live feed of your camera.

Related Topic: How to Make Your Security Cameras Work Without WiFi – Easiest Way

3. Through the DDNS

  • Open an internet browser and then enter the DDNS Domain Name to the URL. Use this format: http:// Your Domain Name. Name of the Web Camera Used. Com.
  • When the camera’s web page interface is displayed, hit the View Video and you can now see a live feed from your network camera.

These are the simple steps on how to set up and access an IP cam remote. Please use these steps for the tutorial here.

What Are the Advantages of Installing an IP Camera?

Advantages of Installing an IP Camera

Unlike the previous versions of analog cameras, network/ IP camera proves to be a better choice since it feeds data in digital phase. Also, all the images are sent through the secured TCP transmission. Read for the other benefits of using a network camera.

  • It is capable of a two-way audio feature that allows the admin to speak and listen to any person present at the monitored site.
  • IP cameras also employ an advanced version of Artificial Intelligence which allows automatic analytics based on the captured scenes or images.
  • It also operates on a more secure transmission of data since it utilizes authentication methods and encryptions such as WPA2, WPA, AES, or TKIP.
  • You can remotely access this camera, so you can view a live update anytime using any device that has sufficient privileges.
  • The image resolution of the network camera is four times higher than the analog camera.
  • You can also power this camera even if you don’t have a power supply. This is through the Power over Ethernet (POW) that supplies power using a patch cable.

Now, if you are still in doubt on what is the difference between the IP camera and Closed-circuit Television (CCTV), read the following information.

What Are the Differences Between IP Camera and CCTV?

Difference

  • Cabling. While the IP camera is deemed as the most significant advancement in surveillance and monitoring, it doesn’t use expensive cable. This camera uses the standard network cable for networking (Cat 5e and Cat 6), unlike the CCTV that utilizes the power cable and coax.
  • Resolution. This is another factor that set the IP camera apart from the CCTV or analog cameras. Network cameras have a higher resolution, and it offers a larger scale of view compared to the analog.
  • Digital Zoom technology. The Digital Zoom feature is exclusive only to IP cameras. This feature allows the admin to virtual zoom in, not just the live feed but the recorded videos as well.  This is very important in the course of investigating crimes, especially zooming in on details like a license plate or the face of the culprit.
  • Cheaper System Expansion. Expanding a CCTV system is costly since there’s a restriction on DVR. Typically, DVR is only capable of handling up to 32 cameras, and beyond that, you need to purchase another DVR.

Meanwhile, if you would like to expand an IP camera system, then you just need to install additional hard disk drives, and the job is done. You must also take note that the coast of HDD have lowered so IP camera expansion will not ruin your budget.

  • More Capabilities. IP camera has more capabilities compared to the CCTV since an onboard processor runs it. Some of these features include motion detection, wide dynamic range, detection of cross line, and low light enhancement.

Conclusion

Have you enjoyed the tutorials and the other important information presented in this article?

The tutorials in this article contained all the crucial steps and configuration to set up an IP camera appropriately. You must follow these steps to ensure that there will be no errors in the installation.

Once you read and understand these steps, you are a step closer to experiencing the comfort and efficiency of using this type of camera.

The IP camera integrates the power of the internet to make your life comfortable and secured. This new breed of a camera not only provides easy access to the user, but it also offers advanced features.

Now, if you have any question, concern, or want to share something, then feel free to comment.

Please do also SHARE this article if you like it to help other people.

Easy Steps in Installing an IP cam Remote That Even a Novice Can Do
  • Readers Rating
  • Rated 5 stars
    5 / 5 (1 )
  • Your Rating